Speed Controllers (Flow Speed Regulators), Flow Control Valves
Pneumatic flow control valves
(pneumatic speed controllers
) equipped with push-in function can regulate air flow to control the operational speed in pneumatic circuit. Push-in function provides the flow control valves
for connecting or disconnecting the tubing easily. Flow control valves
control flow in one direction, allowing free flow in the opposite direction. A finely threaded stem allows gradual adjustment of the amount of controlled flow passing through the valve. Control-in and Control-out are both available.
Pneuflex's flow control valves have two kinds:
♦ Control-Out (Meter-Out). This is the most commonly used flow control valves
that control the exhaust flow from an actuator.
♦ Control-In (Meter-In). This kind of flow control valve is usually used to restrict the flow to an actuator.
Material of flow control valves:
♦ Composite flow control valves.
♦ Full brass flow control valves.
♦ Full Stainless Steel (SS304, SS316, SS316L) flow control valves.
| || || Fluid Admitted ||Air, Vaccum, Water(note) |
| || Working Pressure ||0—1.0MPa | 0—150psi |
| || Proof Pressure ||3.0Mpa | 435psi |
| || Negative Pressure ||-100Kpa | -29.5 In Hg |
| || Working Temperature ||0—60°C | 32～140°F |
| || Applicable Tube ||PU / PA / PE / PVC |
| || Body ||Nickel Plated Brass & PBT / Stainless Steel |
| || Seal, O-ring ||NBR |
| || Lock Claw ||Stainless Steel(SUS) |
| ||note: Applicable for general industrial water. |
|4mm ||5mm ||6mm ||7mm ||8mm ||9mm ||10mm ||12mm ||14mm ||15mm ||16mm |
|1/8" ||5/32" ||3/16" ||1/4" ||5/16" ||3/8" ||1/2" |
|R, PT, BSPT -- 55° Taper Pipe Thread ||Metric Thread |
|R1/8 ||R1/4 ||R3/8 ||R1/2 ||M5 x 0.8 ||M6 x 1 ||M8 x 1 ||M10 x 1 ||M12 x 1.25 ||M14 x 1.5 ||M16 x 1.5 ||M20 x 1.5 |
|UNF ||NPT -- 60° American Standard Taper Pipe Thread |
|10-32UNF ||NPT1/8 ||NPT1/4 ||NPT3/8 ||NPT1/2 |
|BSPP, G -- 55° Parallel Pipe Thread |
|G1/8 ||G1/4 ||G3/8 ||G1/2 |