Sintered Silencers, Sintered Bronze Silencers -- BSL Standard Silencer
BSL standard sintered bronze silencer is widely used on the exhausts of valves to reduce the noise and prevent contamination from entering open exhaust ports and causing premature valve failure. The thread is made of brass and the noise absorbing material is made from sintered bronze. External tightening with a flat wrench or socket wrench. Thread ranges from M5, 10-32UNF to 2".
Material of Pneumatic Sintered Bronze Silencer
- Body(noise absorbing material): Sintered Bronze
- Base(thread): Brass
|PT, R, BSPT - 55° Taper Pipe Thread |
|R1/8 ||R1/4 ||R3/8 ||R1/2 ||R3/4 ||R1 ||R1-1/4 ||R1-1/2 ||R2 |
|BSPP, G - 55° Parallel Pipe Thread |
|G1/8 ||G1/4 ||G3/8 ||G1/2 ||G3/4 ||G1 ||G1-1/4 ||G1-1/2 ||G2 |
|UNF ||NPT - 60°American Standard Taper Pipe Thread |
|10-32UNF ||1/8NPT ||1/4NPT ||3/8NPT ||1/2NPT ||3/4NPT ||1NPT ||1-1/4NPT ||1-1/2NPT ||2NPT |
|Metric Thread* |
|M5 x 0.8 ||M6 x 1 ||M8 x 1 ||M8 x 1.25 ||M10 x 1 ||M10 x 1.25 ||M12 x 1.25 ||M12 x 1.5 ||M14 x 1.5 ||M16 x 1.5 ||M20 x 1.5 |
* Pls contact with Pneuflex for other metric thread.
BSL Standard Sintered Silencer Documentation