Menu
You are here: / / Push in Fittings (PT, R, BSPT, NPT)

Pneumatic FittingsPlastic Push in Fittings (PT, R, BSPT, NPT) come in a variety of types, moulds and sizes to satisfy various tube demands. Accept metric and inch tube, and PT(R, BSPT), NPT thread. Working pressure from 0~1.0Mpa (0~150psi), Working temperature from 0~60ºC (32~140ºF). Accommodate metric tubing O.D ranging from 4mm to 16mm, inch tubing O.D ranging from 1/8" to 1/2". Thread sizes range is from 1/8 to 1/2.

The release sleeves of Pneuflex's push in fittings have multiple colors: Blue, Red, Black and Grey. The shape of sleeves could be oval and round. Meanwhile, Pneuflex could make custom color. Take below image for reference.

Colors of Pneuflex's Push in Fittings

Push in fittings structure    Fluid Admitted Air, Vaccum, Water(note)
   Working Pressure 0∼1.0MPa | 0∼150psi
   Proof Pressure 3.0Mpa | 435psi
   Negative Pressure -100Kpa | -29.5 In Hg
   Working Temperature 0∼60°C | 32~140°F
   Applicable Tube PU / PA / PE / PVC
   Body Nickel Plated Brass & PBT
   Seal, O-ring NBR
   Lock Claw Stainless Steel(SUS)
  note: Applicable for general industrial water. 
Metric Tube ØD
4mm 5mm 6mm 7mm 8mm 9mm 10mm 12mm 14mm 15mm 16mm
 
Inch Tube ØD
1/8" 5/32" 3/16" 1/4" 5/16" 3/8" 1/2"
 
Thread Standard and Type
R, PT, BSPT -- 55° Taper Pipe Thread Metric Thread
R1/8 R1/4 R3/8 R1/2 M5 x 0.8 M6 x 1 M8 x 1 M10 x 1 M12 x 1.25 M14 x 1.5 M16 x 1.5 M20 x 1.5
UNF NPT -- 60° American Standard Taper Pipe Thread
10-32UNF NPT1/8 NPT1/4 NPT3/8 NPT1/2

Male Connector, Pneumatic Fittings, Push in Fittings
PC
Male Elbow, Pneumatic Fittings, Push in Fittings
PL
Extended Male Elbow, Pneumatic Fittings, Push in Fittings
PLL
Female Elbow, Pneumatic Fittings, Push in Fittings
PLF
Bulkhead Union Elbow, Pneumatic Fittings, Push in Fittings
PLM
Female Connector, Pneumatic Fittings, Push in Fittings
PCF
 
Male Branch Tee, Pneumatic Fittings, Push in Fittings
PB
Female Branch Tee, Pneumatic Fittings, Push in Fittings
PBF
Male Run Tee, Pneumatic Fittings, Push in Fittings
PD
Female Run Tee, Pneumatic Fittings, Push in Fittings
PDF
Male Y, Pneumatic Fittings, Push in Fittings
PX
Female Y, Pneumatic Fittings, Push in Fittings
PXF
 
Male Triple, Pneumatic Fittings, Push in Fittings
PKB
Male Triple Reducer, Pneumatic Fittings, Push in Fittings
PKD
Male Banjo, Pneumatic Fittings, Push in Fittings
PH
Female Banjo, Pneumatic Fittings, Push in Fittings
PHF
Bulkhead Female Connector
PMF
Union Straight, Pneumatic Fittings, Push in Fittings
PU
 
Union Straight Reducer, Pneumatic Fittings, Push in Fittings
PG
Union Elbow, Pneumatic Fittings, Push in Fittings
PV
Union Elbow Reducer, Pneumatic Fittings, Push in Fittings
PVG
Union Tee, Pneumatic Fittings, Push in Fittings
PE
Union Tee Reducer, Pneumatic Fittings, Push in Fittings
PEG
Union Tee Reducer, Pneumatic Fittings, Push in Fittings
PGE
 
Union Y, Pneumatic Fittings, Push in Fittings
PY
Union Y Reducer, Pneumatic Fittings, Push in Fittings
PW
Plug-in Reducer, Pneumatic Fittings, Push in Fittings
PGJ
Plug-in Elbow, Pneumatic Fittings, Push in Fittings
PLJ
Plug-in Y, Pneumatic Fittings, Push in Fittings” width=
PYJ
Plug-in Y Reducer, Pneumatic Fittings, Push in Fittings
PWJ
 
Tube Splicer
PIJ
Tube Splicer Reducer
PIG
Plug-in Reducer Triple Branch
PKJ
Fittings Plug, Pneumatic Fittings, Push in Fittings
PP
Bulkhead Union, Pneumatic Fittings, Push in Fittings” width=
PM
Union Cross, Pneumatic Fittings, Push in Fittings
PZA
 
Union Branch, Pneumatic Fittings, Push in Fittings
PK
Union Branch Reducer, Pneumatic Fittings, Push in Fittings
PKG
Double Union Y, Pneumatic Fittings, Push in Fittings
PT
Male Delta Branch, Pneumatic Fittings, Push in Fittings
PHX
Male Double Banjo, Pneumatic Fittings, Push in Fittings
PHD
Male Triple Banjo, Pneumatic Fittings, Push in Fittings
PHT
 
Male Banjo Y, Pneumatic Fittings, Push in Fittings
PHY
Male Double Banjo Y, Pneumatic Fittings, Push in Fittings
PHDY
Tubing Cap, Pneumatic Fittings, Push in Fittings
PPF
Extended push in Female Eblow, Push in Fittings
PLFE
Push in Fittings Round Male Straight
POC

Push in Fittings Catalogue
Pneumatic Fittings, Push in Fittings Documentation
 

Pneuflex Provides Custom Push in Fittings

Pneuflex is manufacturing full series of pneumatic fittings and push in fittings, which provide the essential links in any pneumatic systems and pneumatic airline circuts. All the molds of pneumatic fittings and push in fittings are designed and produced by Pneuflex itself, so Pneuflex has absolute ability to develop custom pneumatic fittings.

Want to cross brand pneumatic fittingsone touch fittings and push in fittings to Pneuflex part#? Use Pneuflex's Crossover Toolcross easily.

OEM Service

Meanwhile, Pneuflex Could offer OEM service on Pneumatic Fittings, Composite Pneumatic Fitting, Pneumatic Push in Fittings, One Touch Tube Fittings with O-ring, Brass Push in Fittings, Compact One Touch Fittings, PU Tubing, Nylon Tubing, Flow Speed Controllers and Hand Valves. Please be free to contact with us for details.

Tubing

Polyurethane Tubing

Nylon Tubing

Polyethylene Tubing

Polyether Tubing

Plastic Tubing

Pneumatic Tubing

Pneumatic Valves

Inline Speed Control

Flow Controls

Composite Right Angle Flow Control

Mini Ball Valve

Check Valve

Stop Valve

Pneumatic Accessories

Sintered Bronze Muffler

Plastic Silencers

Air Blow Guns

Tube Cutters

Threaded Brass Fittings

Standard Pipe Fittings