Pneumatic Fittings - Push in Fittings - Air Tubing - Flow Control Valves
Pneuflex has distributors in 30+ countries and regions.
Pneuflex Push in Fittings Color


Technical Structure                                                  Technical Specifications

     
   Fluid Admitted Air, Vaccum
   Working Pressure 0—1.0MPa      0—150psi
   Negative Pressure        -100Kpa       -29.5 In Hg
   Working Temperature        0—60°C        32~140°F
   Applicable Tube PU / PA
   Body Nickel Plated Brass and PBT
   O-ring NBR
   Lock Claw Stainless Steel(SUS)
     













  Cautions in Application of Tube Joint
  


Thread Standard and Type

R, PT, BSPT -- 55° Taper Pipe Thread   NPT -- 60° American Standard Taper Pipe Thread
R1/8 R1/4 R3/8 R1/2   NPT1/8 NPT1/4 NPT3/8 NPT1/2
 
Metric Thread
M5 x 0.8 M6 x 1 M8 x 1 M10 x 1 M12 x 1.25 M14 x 1.5 M16 x 1.5 M20 x 1.5

push in fittings PC     Male Connector
Most general style. In line connection of tubing to a female threaded port. External tightening with a flat wrench or socket wrench, internal adjustment with an Allen wrench.

push in fittings PL     Male Elbow
Most general style. Connection of tubing at a 90° angle to a female thread. External tightening with a flat wrench.

push in fittings PLL     Extended Male Elbow
Basically, it is used together with male elbow. Different point is that it is used for with fittings to avoid from interfering with each other by making thepiping two-level.

push in fittings PLF     Female Elbow
In line connection of tubing to a male threaded port. External tightening with a flat wrench.

push in fittings PLM     Bulkhead Union Elbow
Connection of two tubes through a panel, changing by 90° in a tubing fetching direction.

push in fittings PCF     Female Connector
In line connection of tubing to a male threaded port. External tightening with a flat wrench or socket wrench.

push in fittings PB     Male Branch Tee
Connection of two tubes at a 90° angle to a female thread. External tightening with a flat wrench.

push in fittings PBF     Female Branch Tee
Connection of two tubes at a 90° angle to a male thread. External tightening with a flat wrench.

push in fittings PD     Male Run Tee
Use to branch line in the same direction from female thread and in 90° direction.

push in fittings PDF     Female Run Tee
Use to branch line in the same direction from male thread and in 90° direction.

push in fittings PX     Male Y
Use to branch line in the same direction from female thread.

push in fittings PXF     Female Y
Use to branch line in the same direction from male thread.

push in fittings PKB     Male Triple Branch
Use to three-branch lines at right angles from female thread.

push in fittings PKD     Male Triple Branch Reducer
Use to three-branch lines at right angles from female thread. Different from PKB, connection of two diffenrent ΦD tubes.

push in fittings PH     Male Banjo
Connection of tubing at a 90° angle to a female threaded port. Tightened on the top of the fitting by use of a flat wrench or a socket wrench.

push in fittings PHF     Female Banjo
Use to branch line in the same direction or at the right angles from male or female thread. Multiplex connection possible.

push in fittings PMF     Bulkhead Female Connector
Use to connect male thead and tube through a panel.

push in fittings PU     Union Straight
In line connection of two tubes of equal tube ΦD.

push in fittings PG     Union Straight Reducer
In line connection of two tubes of different tube ΦD.

push in fittings PV     Union Elbow
Connection at a 90° angle of two tubes of equal tube ΦD.

push in fittings PVG     Union Elbow Reducer
Connection at a 90° angle of two tubes of different tube ΦD.

push in fittings PE     Union Tee
Connection at a 90° angle of three tubes of equal tube ΦD.

push in fittings PEG     Union Tee Reducer
Use to connect tubes with size down in both 90° directions.

push in fittings PGE     Union Tee Reducer
Use to connect tubes with size down in both 90° directions.

push in fittings PY     Union Y
In line connection of three tubes of equal tube ΦD.

push in fittings PW     Union Y Reducer
In line connection of three tubes of different tube ΦD.

push in fittings PGJ     Plug-in Reducer
Use to change sizes of Push in fittings.

push in fittings PLJ     Plug-in Elbow
Connection of tubing at a 90° angle to a push-in fitting or cartridge. Useful on pneumatic control valves or cylinders equipped with cartridges.

push in fittings • PYJ     Plug-in Y
Use to branch line in the same direction from Push in fittings. Tube size and Stem size are equal.

push in fittings PWJ     Plug-in Y Reducer
Use to branch line in the same direction from Push in fittings. Tube size and Stem size are different.

push in fittings PIJ     Tube Splicer
Connection of two push in fittings that are same Tube ΦD.

push in fittings PIG     Tube Splicer Reducer
Connection of two push in fittings that are different Tube ΦD.

push in fittings PKJ     Plug-in Reducer Triple Branch
Use to four-branch line from push in fitting. Tube size and Stem size are same.

push in fittings PP     Plug
Use to plug unused push in fittings.

push in fittings PM     Bulkhead Union
Connect two tubes through a panel.

push in fittings PZA     Union Cross
Distribution of air between 4 tubes at a 90° angle.

push in fittings PK     Union Branch
Used to five-branch lines. Tube sizes are equal.

push in fittings PKG     Union Branch Reducer
Used to five-branch lines. Tube sizes are different.




{backbutton}

Tubing

Polyurethane Tubing

Nylon Tubing

Polyethylene Tubing

Polyether Tubing

Plastic Tubing

Pneumatic Tubing

Pneumatic Valves

Inline Speed Control

Flow Controls

Composite Right Angle Flow Control

Mini Ball Valve

Check Valve

Stop Valve

Pneumatic Accessories

Sintered Bronze Muffler

Plastic Silencers

Air Blow Guns

Tube Cutters

Threaded Brass Fittings

Standard Pipe Fittings