Pneumatic Connection Solutions: Pneumatic Fittings, Pneumatic Push in Fittings and Pneumatic Connectors.
One Touch Tube Fittings with O-ring are equipped with O-ring on the thread, by which sealing is very well, and suitable for G and BSPP thread. Working pressure from 0~1.0Mpa (0~150psi), Working temperature from 0~60ºC (32~140ºF).
Technical Structure Technical Specifications
| Fluid Admitted | Air, Vaccum | |
| Working Pressure | 0—1.0MPa 0—150psi | |
| Negative Pressure | -100Kpa -29.5 In Hg | |
| Working Temperature | 0—60°C 32～140°F | |
| Applicable Tube | PU / PA | |
| Body | Nickel Plated Brass and PBT | |
| O-ring | NBR | |
| Lock Claw | Stainless Steel(SUS) | |
Cautions in Application of Tube Joint
Thread Standard and Type
| BSPP, G -- 55° Parallel Pipe Thread | ||||||||
| G1/8 | G1/4 | G3/8 | G1/2 | |||||
 |
 |
 |
 |
 |
 |
|||||
| PC-G | PL-G | PLL-G | PLF-G | POC-G | PCF |
 |
 |
 |
 |
 |
 |
|||||
| PB-G | PBF-G | PD-G | PDF-G | PX-G | PXF-G |
 |
 |
 |
 |
 |
||||||
| PKB-G | PKD-G | PH-G | PHF-G | PMF-G |
| Maybe you're also interested in: | |
Pneumatic Products List
Tel: +86 574 23619802
Fax: +86 574 56877834
Email:
Sales@wellfittings.com
Sales@pneuflexfittings.com
Pneuflexfittings@yahoo.com
Brass Pneumatic Fittings
Full nickel plated brass pneumatic push-in fittings are superior to normal pneumatic fittings (brass and plastic) on bearing capability of working pressure and temperature. The retained brass collet gives superior tube anchorage. Available metric tube OD. are 4mm 5mm 6mm 8mm 10mm 12mm 16mm. Imperial tube OD. are 1/8" 5/32" 3/16" 1/4" 5/16" 3/8" 1/2".
Inch-NPT Pneumatic Fittings
Pneuflex Inch Tube with NPT thread pneumatic fittings (pneumatic composite push in fittings, push to connect fittings) are very popular in USA, Canada, Mexico, Peru, Colombia and Brazil. Tube O.D sizes include 1/8", 5/32", 3/16", 1/4", 5/16", 3/8" and 1/2", threads sizes are NPT1/8", NPT1/4", NPT3/8" and NPT1/2".
