Tel: +86 574 23619802 | Fax: +86 574 56877834 | Email: sales@wellfittings.com
Reliable Manufacturer... Responsible for Customers...
Home Products Brass Push in Fittings (PT, R, BSPT, NTP)

Brass Push in Fittings (PT, R, BSPT, NPT)


Technical Structure                                                  Technical Specifications
brass push in fittings

     
   Fluid Admitted Air, Water, Steam
 Max Working Pressure 2MPa      290PSI
 Working Temperature   -20—120°C     -4～248°F
 Applicable Tube PU / PA / FEP / PFA
 Body Nickel Plated Brass
 O-ring FKM (Viton)
     










  Cautions in Application of Tube Joint
                                                                                 
Thread Standard and Type

R, PT, BSPT -- 55° Taper Pipe Thread   NPT -- 60° American Standard Taper Pipe Thread
R1/8 R1/4 R3/8 R1/2   NPT1/8 NPT1/4 NPT3/8 NPT1/2
 
Metric Thread
M5 x 0.8 M6 x 1 M8 x 1 M10 x 1 M12 x 1.25 M14 x 1.5 M16 x 1.5 M20 x 1.5


brass push in fittings • BPC     Male Stud
Most general style. In line connection of tubing to a female threaded port. External tightening with a flat wrench or socket wrench, internal adjustment with an Allen wrench.

brass push in fittings • BPOC     Hex. Male Stud
In line connection of tubing to a female threaded port. Internal adjustment with an Allen wrench.

brass push in fittings • BPL     Male Swivel Elbow
Most general style. Connection of tubing at a 90° angle to a female thread. External tightening with a flat wrench. 360° swivel.

brass push in fittings • BPLL     Extended Male Swivel Elbow
Basically, it is used together with male swivel elbow. Different point is that it is used for with fittings to avoid from interfering with each other by making thepiping two-level. 360° swivel.

brass push in fittings • BPLF     Female Swivel Elbow
In line connection of tubing to a male threaded port. External tightening with a flat wrench. 360° swivel.

brass push in fittings • BPCF     Female Stud
In line connection of tubing to a male threaded port. External tightening with a flat wrench or socket wrench.

brass push in fittings • BPB     Male Swivel Branch Tee
Connection of two tubes at a 90° angle to a female thread. External tightening with a flat wrench. 360° swivel.

brass push in fittings • BPD     Male Swivel Run Tee
Use to branch line in the same direction from female thread and in 90° direction. 360° swivel.

brass push in fittings • BPX     Male Swivel Y
Use to branch line in the same direction from female thread. 360° swivel.

brass push in fittings • BPMF     Bulkhead Straight
Use to connect male thead and tube through a panel.

brass push in fittings • BPU     Union Straight
In line connection of two tubes of equal tube ΦD.

brass push in fittings • BPG     Union Reducer
In line connection of two tubes of different tube ΦD.

brass push in fittings • BPV     Union Elbow
Connection at a 90° angle of two tubes of equal tube ΦD.

brass push in fittings • BPE     Union T
Connection at a 90° angle of three tubes of equal tube ΦD.

brass push in fittings • BPEG     Union Reducer T
Use to connect tubes with size down in both 90° directions.

brass push in fittings • BPY     Union Y
In line connection of three tubes of equal tube ΦD.

brass push in fittings • BPZA     Union Cross
Distribution of air between 4 tubes at a 90° angle.

brass push in fittings • BPP     Plug
Use to plug unused push in fittings.

brass push in fittings • BPH     Male Swivel Banjo
Connection of tubing at a 90° angle to a female threaded port. Tightened on the top of the fitting by use of a flat wrench or a socket wrench. 360° swivel.

brass push in fittings • BDPH     Double Male Swivel Banjo
Connection of two tubings at a 90° angle to a female threaded port. Tightened on the top of the fitting by use of a flat wrench or a socket wrench. 360° swivel.

brass push in fittings • BTPH     Triple Male Swivel Banjo
Connection of three tubings at a 90° angle to a female threaded port. Tightened on the top of the fitting by use of a flat wrench or a socket wrench. 360° swivel.

brass push in fittings • BPHF      Female Swivel Banjo
Use to branch line in the same direction or at the right angles from male or female thread. Multiplex connection possible. 360° swivel.

brass push in fittings • BPK     Male Swivel Banjo
Connection of two tubings at a 90° angle to a female threaded port. Tightened on the top of the fitting by use of a flat wrench or a socket wrench. 360° swivel.

brass push in fittings • BDPK     Double Male Swivel Banjo
Connection of four tubings at a 90° angle to a female threaded port. Tightened on the top of the fitting by use of a flat wrench or a socket wrench. 360° swivel.

brass push in fittings • BTPK     Triple Male Swivel Banjo
Connection of six tubings at a 90° angle to a female threaded port. Tightened on the top of the fitting by use of a flat wrench or a socket wrench. 360° swivel.

brass push in fittings • BPGJ     Plug-in Union Reducer
Use to change sizes of Push in fittings.

brass push in fittings • BPLJ     Plug-in Elbow
Connection of tubing at a 90° angle to a push-in fitting or cartridge. Useful on pneumatic control valves or cylinders equipped with cartridges.

brass push in fittings • BPLGJ     Plug-in Elbow Reducer
Use to change sizes of Push in fittings.




【Back】

Products Index

Official Websites Link

A Professional Manufacturer and Factory in China that specializes in Pneumatic Fittings, Pneumatic Accessories, Push in Fittings, One Touch Tube Fittings with O-ring, Nickel Plated Push in Fittings, Air Fittings, Push to Connect Fittings, Speed Controllers, Flow Speed Regulators, PU Tube, Nylon Tubing, Pneumatic Air Tubing, Brass Push in Fittings, Metal Push in Fittings with O-ring, Compact One Touch Fittings, Miniature Push in Fittins, Bronze Silencers, Sintered Silencers, Plastic Mufflers, Hand (Shut-off) Valves, Air Blow Guns, Stop Fittings, Check Valves, Pneumatic Equipments, Water Purifier Fittings, Water Push in Fittings, Flow Regulation Valves, Pneumatic Valves, Plastic Push in Fittings, NPT Air Fittings, Inch Push in Fittings, Metric Push in Fittings, Cylinder Fittings